TC88A EX PLUG-IN IGNITION - 1009-EX

$0.00
(No reviews yet) Write a Review
SKU:
1009-EX
FOR ALL 2004-2006 CARBURETED TWIN-CAM 88- AND SPORTSTER- MODELS WITH SINGLE 12 PIN CONNECTOR

TC88A - TWIN CAM IGNITION

WIDE TIMING ADVANCE ADJUSTMENT RANGE ACCOMMODATES STOCK TO HIGHLY MODIFIED ENGINES

  • &MIDDOT DIGITALLY SET RPM LIMIT (100 RPM STEPS FROM 3000 TO 9900 RPM)
  • &MIDDOT FULL SUPPORT FOR J1850 DATA BUS USED FOR COMMUNICATIONS WITH INSTRUMENT CLUSTER AND TURN SIGNAL/SECURITY MODULE (TSM/TSSM)
  • &MIDDOT COMPATIBLE WITH AFTERMARKET TACHOMETERS
  • &MIDDOT BUILT-IN DATA LOGGING. STORES LAST 30 MINUTES OF ENGINE OPERATION
  • &MIDDOT EXTENSIVE DIAGNOSTICS
  • &MIDDOT OPTIONAL USB INTERFACE AND SOFTWARE FOR CUSTOM PROGRAMMING AND DATA ANALYSIS.
  • &MIDDOT BILLET ALUMINUM HOUSING WITH BLACK ANODIZED FINISH
  • &MIDDOT EASY PLUG-IN INSTALLATION

THE TC88A PROVIDES COVERAGE FOR ALL 2004 AND LATER H-D® CARBURETED MODELS USING THE NEW 12 PIN IGNITION MODULE. THE 50 STATES STREET LEGAL TC88A EX VERSION FITS 2004-2006 CARBURETED TWIN CAM 88® ENGINES AND FEATURES ADVANCE CURVES SUITABLE FOR ALL STREET APPLICATIONS INCLUDING HIGH COMPRESSION ENGINES. THE TC88A RACE VERSION FITS ALL 2004-2006 CARBURETED TWIN CAM 88® AND 2004-2006 SPORTSTER® ENGINES AND INCLUDES RACE ADVANCE CURVES WITH A SLIGHTLY WIDER ADJUSTMENT RANGE. NOTE FOR SPORTSTER® CUSTOMERS: ALL TC88A UNITS FOR SPORTSTER® APPLICATIONS REQUIRE SPECIAL CALIBRATION FOR CORRECT SPEEDOMETER READINGS. PLEASE INDICATE THE YEAR AND MODEL OF YOUR SPORTSTER® WHEN ORDERING. THE TC88A IS CONSTRUCTED WITH A LOW PROFILE MACHINED BILLET ALUMINUM HOUSING. THE UNIT OFFERS EASY PLUG-IN INSTALLATION AND ALL THE SWITCHES ARE ACCESSIBLE FROM THE TOP - A SIGNIFICANT ADVANTAGE FOR MOST INSTALLATIONS.

FOUR ROTARY SWITCHES ARE USED TO SET THE ADVANCE CHARACTERISTICS AND RPM LIMIT. SINCE THE NEW ENGINES USE A NON-ADJUSTABLE CRANKSHAFT POSITION SENSOR MECHANICAL TIMING ADJUSTMENTS ARE NO LONGER POSSIBLE. THE TC88A SOLVES THIS PROBLEM WITH A SWITCH FOR SETTING THE INITIAL TIMING. A SECOND SWITCH SETS THE SLOPE OF THE ADVANCE CURVE. THE COMBINATION OF THESE TWO SWITCHES ALLOWS THE USER TO OPTIMIZE THE TIMING ADVANCE FOR A WIDE RANGE OF APPLICATIONS - FROM STOCK TO HIGHLY MODIFIED ENGINES.

NEW H-D® MOTORCYCLES USE THE SAE J1850 DATA BUS FOR COMMUNICATIONS BETWEEN THE IGNITION MODULE INSTRUMENT CLUSTER AND TURN SIGNAL/SECURITY MODULE (TSM/TSSM). THE TC88A FULLY SUPPORTS THIS NEW J1850 DATA BUS.

THE TC88A FEATURES BUILT-IN DATA LOGGING THAT STORES DATA FOR THE LAST 30 MINUTES OF ENGINE OPERATION INCLUDING RPM VEHICLE SPEED MANIFOLD PRESSURE IGNITION ADVANCE AND BATTERY VOLTAGE. ENGINE BUILDERS WILL FIND THE DATA LOGGING FEATURE HIGHLY USEFUL FOR TUNING DIAGNOSING PROBLEMS AND REDUCING UNJUSTIFIED WARRANTY CLAIMS.

AN OPTIONAL USB INTERFACE AND WINDOWS COMPATIBLE SOFTWARE ALLOW THE USE OF A LAPTOP PC TO PROGRAM A CUSTOM ADVANCE CURVE FOR PRECISE DYNO TUNING DOWNLOAD DATA LOGGED BY THE UNIT AND ACCESS ADDITIONAL FEATURES SUCH AS SPEEDOMETER/ODOMETER RECALIBRATION (TO ACCOMMODATE TIRE AND GEAR CHANGES). THE USB INTERFACE PLUGS INTO THE EXISTING H-D® DIAGNOSTIC CONNECTOR ON THE MOTORCYCLE WIRING HARNESS. THE USB INTERFACE IS SOLD SEPARATELY BUT WINDOWS COMPATIBLE SOFTWARE IS AVAILABLE FOR DOWNLOAD. THE SOFTWARE WILL OPERATE IN DEMO MODE WITHOUT AN IGNITION ATTACHED.

LIKE THE H-D® OE MODULE THE TC88A SENDS RPM DATA TO THE OE TACHOMETER OVER THE J1850 DATA BUS. TC88A UNITS ALSO PROVIDE AN OPTIONAL 12 VOLT SQUARE WAVE TACH SIGNAL (ONE PULSE PER REVOLUTION) THAT IS COMPATIBLE WITH MOST TACHOMETERS INTENDED FOR 1999-2003 TWIN CAM 88® APPLICATIONS. THIS ALLOWS YOU TO RETROFIT A WIDE RANGE OF TACHOMETERS TO NEWER 2004-2006 MODELS. PLEASE DOWNLOAD THE TC88A INSTALLATION INSTRUCTIONS FOR DETAILS ON TACH HOOKUP. IF YOU PLAN TO USE THE OPTIONAL TACH HOOKUP YOU WILL REQUIRE THE USB INTERFACE AND SOFTWARE TO ENABLE THE TACH OUTPUT.

Instructions: https://www.jmschip.com/content/DTT/INSTRUCTIONS/1009-EX_TC88A_EX_Instructions.pdf