EVOLUTION^&OGRAVE INTERNAL IGNITION FEATURING STAGE RPM LIMIT

THE PURPLE/WHITE WIRE NORMALLY USED FOR THE VOES CONNECTION IS USED TO SELECT BETWEEN THE STAGE AND MAXIMUM RPM LIMIT. THE STAGE RPM LIMIT IS SET BY MEANS OF THE TWO ROTARY SWITCHES ON THE MODULE. THE MAXIMUM RPM LIMIT IS PROGRAMMED BY MEANS OF THE USB INTERFACE CABLE (P/N 18014) AND PC LINK EVO SOFTWARE. WHEN THE PURPLE/WHITE WIRE IS GROUNDED BY MEANS OF A SWITCH THE STAGE RPM LIMIT IS SELECTED OTHERWISE THE MAXIMUM RPM LIMIT IS SELECTED.

STAGE AND MAXIMUM RPM LIMITS ARE INDEPENDENT AND MAY HAVE ANY VALUE BETWEEN 3000 AND 9900 RPM. THE MAXIMUM RPM LIMIT IS PROGRAMMED AT THE FACTORY TO 5700 RPM. YOU MUST USE THE USB INTERFACE CABLE AND PC LINK EVO SOFTWARE TO REPROGRAM THE MAXIMUM RPM LIMIT. THE STAGE LIMIT CAN BE ADJUSTED AT ANY TIME EVEN WHEN THE ENGINE IS RUNNING BY CHANGING THE RPM SWITCH SETTINGS ON THE MODULE.

SINCE THE NORMAL VOES INPUT IS NOT AVAILABLE THE WIDE OPEN THROTTLE (WOT) ADVANCE CURVE IS ALWAYS ACTIVE.

Instructions: https://www.jmschip.com/content/DTT/INSTRUCTIONS/1005_Instructions.pdf